WebDT DT365 User Manual
Page 2
DT365
Button Functions
BUTTON ACTION
As SAS button without the scanner module
As scanner trigger when equipped with the scanner module
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts tablet (software dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
Input/ Output Ports
Magnetic Stripe Reader (MSR)
USB Port
Microphone Jack
Headphone Jack
SD Slot
DC Power Input
The DT365
1
2
A
B
C
D
Battery/Power LED
Wireless LED
1
2
F
E
E
F
B
A
D
C
ENGLISH
2
3
ENGLISH
Power/Battery LED Status:
Blue indicates the battery is 25% to 100% charged
•
Blinking blue indicates the battery is charging
•
Orange indicates that the battery is between 11% to 25%
•
Blinking Orange indicates that the battery is below 10%
•
Precautions
Always exercise care when operating and handling the DT365.
•
Do NOT apply excessive pressure to the display screen.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the DT365 should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any
•
AC-DC adapter other than the one provided or acquired from the manufacturer or its
partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power off the DT365 and disconnect all power sources. Report the
problem to your device provider immediately.
Never attempt to disassemble the
•
DT365, as this will void the warranty.
THE DT365
Basic Features
The DT365 wireless tablet integrates a bright display, one USB port, and embedded
networking elements such as wireless LAN and Bluetooth or optional 3G. The DT365 is
complemented by a suite of accessories, including battery expansion, charging cradles,
and battery charger kit, for a comprehensive user experience.
A DT365 typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT365 does not come with
such a network adapter, please consult your device provider to establish the desired
network connectivity.