Mobile pos tablet, Rfid reader, Data capture module operation guide – WebDT DT313H/DT315CT/ DT365/ DT395/ DT398B/ DT398C Modules BOG (Win7/ WES7) User Manual
Page 3: The default port parameter for rfid module, Specifications
www.dtresearch.com
Mobile POS Tablet
RFID Reader
The Default Port Parameter for RFID Module
Port
COM4
Baud Rate
9600
Data Bits
8
Parity
None
Stop Bits
1
Flow Control
None
RFID Reader
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
http://www.dtresearch.com
Copyright © 2015, DT Research, Inc. All Rights Reserved.
To Test RFID Reader Module
Click
1.
Start | All Programs | Accessories | NotePad to run the Notepad.
Place an RFID tag or RFID card within range of the RFID
2.
Reader. (see reading range in specifications). The output
will appear in the Notepad screen.
Verify the captured data.
3.
SPECIFICATIONS
Frequency
13.56MHz ±7 KHz
Reading Range
Within 30mm
HF RFID Reader
ISO 15693,1443A(B), 18000-3 mode-1
To Connect RFID Reader Module
To connect the RFID, you can use the Keyboard Wedge. Tap on the
icon in the task bar, a
menu displays as shown in the picture below. Select Connect RFID.
RFID connected
DATA CAPTURE MODULE OPERATION GUIDE