Wharfedale Pro Delta 18BA User Manual

Page 7

Advertising
background image

5

1. Volume for input A and input B: These knobs control the level of each input channel.

2. RCA L/R (Left and Right) input jacks: These jacks allow input of a stereo signal (left and right). The

signal is actively combined or "summed" providing a mono signal to the amplifier.

3. GAIN selection switch: This switch selects the proper gain structure for INPUT A. If a microphone is

connected to INPUT A, use mic mode (up). If the signal source is anything other than a microphone
(playback device, keyboard or mixer output, for instance) use the line mode (down).

4. XLR 1/4" COMBO input jacks for INPUT A and INPUT B: These conveninet jacks allow XLR or 1/4"

balanced input connections to INPUT A and INPUT B.

5. HI and LOW EQ (equalization) controls: These knobs control the equalization of the overall output signal

providing +/-10dB of gain for each band.

6. Remote control: This Pheonix connector can be used to control the volume with an applied voltage.

7. 90Hz Monitor filter switch: Used to reduce bass buildup due to half space loading.

8. Front LED defeat switch: Switches off the front power LED for disrete applications.

9 &10. POWER ON /OFF switch, POWER 'ON' indicator LED and LIMIT indicator LED: The swtich: Turns

the power on and off. The green LED to the left of the POWER switch illuminates when the power switch
is in the 'ON' position. The red LED illuminates when the signal limiter is limiting the level of the signal to
prevent distortion and overload.

11.Output source "LOOP/MIX" switch: In the "LOOP" mode, this switch routes the signal of INPUT A and

B to the line level XLR OUTPUT jack, bypassing the EQ section and volume control. When in the MIX
mode, this switch routes the combined (or "mixed") signals of both INPUT A and INPUT B to the line level
XLR OUTPUT jack.

12.POWER cord receptacle: This is a receptacle for a standard IEC, three prong, grounded AC electrical

connection cord. Be sure that you are plugging into the correct source voltage that matches what is
indicated just below the power cod receptacle.

13.XLR line level OUTPUT jack: This jack provides a balanced line level output for connection to additional

Delta Active, powered subwoofers or amplifier.

Advertising
This manual is related to the following products: