Wharfedale Pro WPM-1 - Manual (Page 8)

OPERATING MANUAL AND USER GUIDE
7
MICROPHONE STAND MOUNTING PROCEDURE
. Place an appropriate microphone stand on a stable and even
surface.
Ensure that the stand will not cause an obstruction to the stage or
front of house area.
Ensure that the polar pickup pattern of the microphone is not within
the vertical or horizontal coverage of the front of house system.
Poorly positioned microphones will greatly increase the risk
of feedback.
2. Attach the microphone stand adaptor to the threaded shaft on
the stand. If you are using a boom stand remove the boom arm
and attach the adaptor to the top of the vertical section.The
stand adaptor has a thread adaptor to cater for ⅜” and
⅝” sizes.
Observe the slot at the top of the adaptor, there is a ‘key’ within the
WPM-1 microphone stand receptacle that will fit into the
slot. This system will lock the WPM- into place and will prevent it
from rotating during the performance. The performer will be
perpendicular to the slot.
Ensure that the adaptor is securely screwed to the microphone
stand.
3. There are 2 adaptor receptacles, one on the angled section
for use with a boom stand and one on the bottom that is
for use with straight microphone stands.
Place the WPM- onto the stand adaptor. Take care to allow the
weight of the WPM-1 to gently rest on the stand adaptor. Before
you release the weight of the WPM- make sure that it feels secure
and well balanced on the stand.
4. If you do not wish to mount a boom arm and microphone on
the top of the WPM-1 the mounting process is complete
and you are ready to make your wiring connections, jump to
step 9.
5. Screw the boom arm mounting into the base of your boom
arm. ⅜” and ⅝” boom arm mountings are provided with your
WPM-1.
WPM-1 User Manual.indd 7 2011-1-24 10:29:25