Wharfedale Pro Versadrive SC-26 - Manual (Page 7)

6
The Versadrive SC-26 central panel shows a visual display
of the crossover and the EQ. You can either control the EQ
using a click-and-drag method on the visual display or use the
controls below.
To the right is a screenshot of the inputs. To edit click channels
-6 and this will bring up all the settings. You can toggle to
display the EQ curve or not using the CURVE button, while
the link dropdown menu duplicates the settings across many
channels i.e. if you set CH2 and CH3 to ‘link_’, the effect
settings of CH will be replicated on CH2 and CH3.
For each of the two inputs EQ, A 6 band parametric EQ can
be assigned. For the outputs, the EQ can be toggled between
parametric, hi shelf and lo shelf. All features including slope,
gain, mode and frequency can be controlled easily with the
interface with options to bypass the whole EQ, or bypass
specific bands. Please note you can also click and drag on the
EQ graphical display for added convenience.
When a particular input channel is selected for editing, to the
left of the EQ, volume, polarity, delay and a noise gate can be
set. The delay setting also has control over feet.
The settings of the Versadrive SC-26 can be edited from your PC via USB connection. This can be done live during
performance or you can store settings to the unit before your gig. An additional RS-485 connection allows long-distance
network use allowing 250 units to be used at once while being up to 500m away from the PC. When using multiple
Versadrive SC-26 units, click the INTERFACE button on the right hand side of the window and you can select a different
unit.
PC Software Operation
EQ & Crossover Display
Input & Output Select
EQ Control
Additional Input Channel Settings