Wharfedale Pro KMD7 - Manual (Page 4)

OPERATING MANUAL

IMPORTANT WARNINGS & SAFETY
INSTRUCTIONS
1. READ ALL INSTRUCTIONS carefully and become
familiar with the features and functions of these
products before operating them.
2. RETAIN THESE INSTRUCTIONS for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and
instructions for this product should be adhered to.
4. USE WITH MIXERS & AMPLIFIERS – In order to avoid
damage to drivers and other equipment, it is advisable
to establish and follow a routine for powering up
and powering down a sound system. With all system
components connected, turn on source equipment
(mixers, signal processors, record and playback
units, etc.) BEFORE powering up amplifiers. Transient
voltages from powering up source equipment can
damage speakers (HF Drivers) if amplifiers are
already turned on. Make sure that amplifier volumes
are set to their minimum settings and power up any
system amplifiers LAST. It is recommended that all
system components be allowed to stabilize for several
seconds before any source signals are introduced or
level setting adjustments are made. Similarly, when
shutting systems down, turn all amplifiers off first,
before powering down any other system components.