Wharfedale Pro Contact 800T - Manual (Page 12)

OPERATING MANUAL
0
LOCK / UNLOCK function:
Holding the ‘MENU’ button down for more than 3 seconds will
result in the word “LOCK” being displayed on the LCD panel.
This function stores the unit’s settings at the currently selected
configuration. When the unit is in “LOCK” mode holding the
‘MENU’ button for 3 seconds will toggle the function back to
the “UNLOCK” mode and parameters can be changed.
Display Modes:
Pressing the ‘MENU’ but ton repeatedly will change the
information displayed in the alpha- numeric section of the LCD
panel showing the five display modes available:
-GROUP/CH
-FREQ (Frequency)
-SQ (Squelch)
-VOL (Mute)
-NAME (Name) will be highlighted in the display with each
press of the ‘MENU’ button
be highlighted showing which antenna has been automatically
selected for the strongest reception.
In accordance with the operating instructions of your mixer or
output device, adjust the gain controls and gradually increase
the ‘VOLUME’ knob on the Contact 800T receiver to achieve a
suitable level setting of the microphone signal.
LCD DISPLAY LEGEND
Contact 800T User Manual.indd 10 2010-10-21 17:34:46