Bank names, Volume pedal update, Factory reset – DigiTech RP21D User Manual
Page 64: Vol pedal update, Bank: showcase name
Bank Names
You can assign custom names to every Bank in the RP21D. The Procedure for naming your Banks is as follows:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page 12 of the utilities. The Display reads:
2. Press the number two button and rotate the Data Wheel to select the Bank that you wish to rename.
3. Press the number four button and rotate the Data Wheel. This will take you to the Name menu. Please see page 47 for Naming
instructions.
Volume Pedal Update
The RP21D has the ability to update the position of the expression controller pedal when it is assigned to Volume within any program. This
means that the volume pedals position will correspond to the volume setting after changing the ProgramTo enable this feature, the procedure
is as follows:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page 16. This display should look like this:
2. To enable this Volume Pedal update rotate the Data Wheel until the display says On.
Now in any Program where the expression pedal is assigned to the Volume parameter, the expression pedal’s current position will be
updated when that preset is selected.
Factory Reset
This function resets the RP21D to its original factory settings. This procedure will erase all custom user Programs, Defaults and Utility
settings.
ATTENTION: This procedure will erase all user settings in the RP21D. Be sure you want to erase the memory and start fresh
before continuing with this procedure.
To perform a Factory Reset, do the following:
1. Press the Utility button once. Use the Next or Previous Page buttons until you reach page13 of the utility menu. The Display reads:
2. To initiate the Reset, press the number one button. The Display reads:
Factory Reset?
2
FACTORY
USER
1
CHANGED
LINK
1
2
CHANGED
LINK
1
3
CHANGED
LINK
Yes
4
CHANGED
LINK
PAGE
14
OF
15
COMP
WAH
TUBE
EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
EQ
DIST
Vol Pedal Update
2
FACTORY
USER
Off
1
CHANGED
LINK
1
2
CHANGED
LINK
1
3
CHANGED
LINK
dn
4
CHANGED
LINK
PAGE
13
OF
15
COMP
WAH
TUBE
EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
EQ
DIST
Bank: Showcase Name?
2
FACTORY
USER
1
CHANGED
LINK
1
2
CHANGED
LINK
1
3
CHANGED
LINK
Yes
4
CHANGED
LINK
PAGE
12
OF
15
COMP
WAH
TUBE
EQ
L/R OUTS
L/R OUTS
DIGITAL
CLIP
#
b
GATE
EQ
DIST
59
RP21D User’s Guide Section Four - Utilities