Z-Systems z-Q6 six-channel mastering equalizer - Manual (Page 10)

z-Q6 manual
10
Specifications
•
Inputs: 3 AES/EBU (transformer-isolated, 110-ohm terminated),
•
Outputs: 3 AES/EBU (transformer-isolated, 110-ohm terminated),
•
Input/output precision: up to 24-bits
•
Gain control: from -95 dB to +12 dB
•
Gain resolution: 0.2 dB increments from +12 dB to -12 dB, 1 dB increments from -12 dB to -
20 dB, 2 dB increments from -20 dB to -50 dB, 3 dB increments from -50 dB to -70 dB, 5 dB
increments from -70 dB to -95 dB
•
Filter types: 4 parametric, 2 shelving x 6 channels
•
Center frequency resolution: 1/6-th octave ISO from 28 Hz to 18 kHz
•
Filter gain/cut: from -95 dB to +12.0 dB
•
Filter bandwidths: 12 steps from Q = 0.4 to Q = 8.0 (nominal)
•
Shelf filter slopes: 6 dB/octave
•
Dither types: 24-bit, 20-bit and 16-bit proprietary floating-point techniques
•
Noise shaping types: POW-r curves #2 and #3
•
Digital filter architecture: proprietary minimum roundoff-noise structure
•
Dynamic range: better than 144 dB
•
THD+N: better than -135 dB
•
Processor type: TMS320C31 32-bit floating-point DSP (x3)
•
Processor performance: 80 MFLOPS (x3)
•
Digital audio demodulator/modulator: Crystal Semiconductor CS8414/CS8404 (x3)
•
Digital audio signal transformers: Scientific Conversions SC916-01
•
Sample rates supported: 44.1 kHz, 48.0 kHz, 88.2 kHz, 96 kHz
•
Auxiliary-bit status handling: unit is transparent to channel status, validity, and auxiliary bits
•
Number of presets: 50
•
Power supply: 110/220VAC, 50/60Hz