Linksys WRT54GS - Manual (Page 23)

Chapter3
Advanced Configuration
9 Wreless-G Broadband Router wth SpeedBooster
Administration > Firmware Upgrade
The Administration > Firmware Upgrade screen allows you
to upgrade the Router’s firmware. Do not upgrade the
firmware unless you are experiencing problems with the
Router or the new firmware has a feature you want to use.
Administration > Firmware Upgrade
Before upgrading the firmware, download the Router’s
firmware upgrade file from the Linksys website, www.
linksys.com. Then extract the file.
Upgrade Firmware
Please select a fle to upgrade Click the Browse
button and select the extracted firmware upgrade file.
Then click the Upgrade button and follow the on-screen
instructions.
Administration > Config Management
This screen is used to back up or restore the Router’s
configuration file.
Administration > Config Management
Backup Configuration
To back up the Router’s configuration file, click the Backup
button. Then follow the on-screen instructions.
Restore Configuration
Please select a fle to restore Click the Browse button
and select the configuration file. Then click the Restore
button.
Status > Router
The Status > Router screen displays the Router’s current
status.
Administration > Factory Defaults
Router Information
Frmware Verson This is the Router’s current firmware.
Current Tme This shows the time, as you set on the
Setup tab.
MAC Address This is the Router’s MAC Address, as seen
by your ISP.
Router Name This is the specific name for the Router,
which you set on the Setup tab.
Host Name If required by your ISP, this would have been
entered on the Setup tab.
Doman Name If required by your ISP, this would have
been entered on the Setup tab.
Internet
Configuration Type
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the Setup > Basic
Setup screen.
Click the Refresh button to update the on-screen
information.