Epson WorkForce 520 series - Manual (Page 37)

Setting Up Fax Features 37
In Auto Answer mode, if the incoming call is a fax and you pick up the phone or
the answering machine answers, the WorkForce 520/525 Series automatically
begins receiving the fax. If the other party is a caller, the phone can be used as
normal or a message can be left on the answering machine.
Note:
Any phone or answering machine must be connected to the EXT. port to detect an
incoming fax call when a phone is picked up.
Setting Up Fax Features
Before sending or receiving faxes, you should create a fax header and select the
number of rings before the fax answers.
Note:
To select other settings or use the Epson FAX Utility, see the online User’s Guide.
Entering Fax Header Information
You should enter your name and phone number in the fax header before sending
faxes so that recipients can identify the origin of the fax.
Note:
If you leave the WorkForce 520/525 Series unplugged for a long period of time, the date
and time settings may get lost. See the Start Here sheet or online User’s Guide for
instructions on resetting them.
Entering Your Sender Name
1. Press the K Fax button, then press x Menu .
2. Press u or d to select Fax Settings , then
press OK .
3. Press u or d to select Header , then press OK .
4. Press OK to select Fax Header .
5. Use the numeric keypad to enter your sender name or other header
information (see “Using the Keypad to Enter Numbers and Characters” on
page 38). You can enter up to 40 digits.
6. When you’re done, press OK to return to the Fax Header screen.