Using song list mode – Pontiac 2003 Vibe User Manual

Page 163

Advertising
background image

3-23

tSEEK u: To seek, press the left arrow while

playing a CD to go to the start of the current track, if
more than ten seconds have passed. Press the right arrow
to go to the next track. If you press the button more than
once, the player will continue moving backward or
forward through the disc.

tSCAN u: To scan one disc, press and hold either

SCAN arrow for more than two seconds until SCAN
appears on the display and you hear a beep. Use this
feature to listen to each track of the currently selected
disc for ten seconds. Press either SCAN arrow again to
stop scanning.

To scan all loaded discs, press and hold either SCAN
arrow for more than four seconds until DISC SCAN
appears on the display and you hear a beep. Use this
feature to listen to the first track, for ten seconds for
each disc loaded. Press either SCAN arrow again, to
stop scanning.

RCL (Recall): Press this knob to see how long the
current track has been playing. To change what is
normally shown on the display (track or elapsed time),
push this knob until you see the display you want, then
hold the knob until the display flashes.

AM FM: Press this button to play the radio when a
disc(s) is in the player.

Using Song List Mode

The integrated six

-

disc CD changer has a feature called

song list. This feature is capable of saving 20 track
selections.

To save tracks into the song list feature, perform the
following steps:

1. Turn the disc player on and load it with at least one

disc. See “LOAD CD” listed previously in this
section for more information.

2. Check to see that the disc changer is not in song list

mode. S

-

LIST should not appear in the display. If

S

-

LIST is present, press the SONG LIST button to

turn it off.

3. Select the desired disc by pressing the numbered

pushbutton and then use the SEEK SCAN right
arrow button to locate the track that you want to
save. The track will begin to play.

4. Press and hold the SONG LIST button for two or

more seconds to save the track into memory. When
SONG LIST is pressed a beep will be heard
immediately. After two seconds of pressing SONG
LIST continuously, two beeps will sound to confirm
that the track has been saved.

5. Repeat Steps 3 and 4 for saving other selections.

Advertising