Dynex DX-PD510 - Manual (Page 29)

29
Installing the Battery Pack:
1. First, make sure the player is in ‘Stop’ mode and that the AC power
supply has been disconnected.
2. Close the player cover.
3. Align the battery pack with the player module
’s front edge.
4. Push the battery towards the rear of the player until it locks into
position.The lock position is indicated by a click. The unit will fit
snugly to the player.
Installing the DVD Player Battery
Removing the Battery Pack:
1. First, make sure the player is in ‘Stop’ mode and that the AC
power supply has been disconnected.
2. Press the release button in the down direction.
3. Slide the battery towards the front of the unit.
Removing the DVD Player Battery
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com