DeLonghi PINGUINO PAC 600T - Manual (Page 5)

7
ENGLISH
S e t t i n g u p
AIR CONDITIONING WITH INSTALLATION
For more efficient use Pinguino can also be
semi-permanently installed
• Fit the flange supplied to the hole.
• Fix the hose to the coupling on the
back of the unit (figure A).
• Attach the end of the hose to the flan-
ge as shown in the figure F. 24
25
25
24
To install, proceed as follows:
•
Make a hole in a outside wall or through
the glass of a window. Check the height
and dimensions given in figure E
12"
12"
30 cm
30 cm
4
"
1
0
0
MAX 47" (120 cm)
MIN 12" (30 cm)
When the hose is not attached, close the
hole with the bung on the flange .
NOTE:
When the unit is installed semi-permanently,
we recommend leaving a door slightly open
(1 cm is enough) to ensure an adequate
exchange of air.
24
25
in a window
pane in the wall: for
optimum results,
insulate the sec-
tion of the wall
with suitable
insulating mate-
rial. in the
wood sill of
a window
E
F