Ryobi YN250FSE - Manual (Page 8)

8 — English
PACKING LIST
Straight Finish Nailer
Oil
Sample Fasteners
Hex Keys (3 mm and 4 mm)
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
FEATURES
UNPACKING
This product has been shipped completely assembled.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
ASSEMBLY
PRODUCT SPECIFICATIONS
Operating Pressure.............................................70-120 psi
Fastener Type ..................................... 16 gauge finish nails
Fastener Range ..........................................1 in. to 2-1/2 in. Magazine Capacity ................................................110 nails
Air Consumption.............................0.09 ft3/cycle at 100psi
Air Inlet .............................................................. 1/4 in. NPT
Weight ..................................................................... 4.2 lbs.
KNOW YOUR STRAIGHT FINISH NAILER
See Figure 1, page 15.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
ADJUSTABLE EXHAUST
The exhaust can be adjusted to a variety of positions de-
pending on operator preference.
DEPTH OF DRIVE ADJUSTMENT
The tool-free depth of drive adjustment lets the operator
select precise driving depth of the fastener.
JAM RELEASE
A tool-free jam release is provided for ease in clearing infre-
quent jams.
NO-MAR NOSEPIECE
The no-mar nosepiece prevents marring and denting when
using the tool on softer woods.
REAR LOADING MAGAZINE
The rear loading magazine offers quick three-step reloading
of fasteners.
TRIGGER
Your straight finish nailler has a single sequential trigger for
precise fastener placement.