Emptying the clear bin, Cleaning the clear bin, Washing your filter – DYSON DC18 User Manual

Page 4: Clearing blockages/brushbar, Sa ve these instructions

Advertising
background image

Emptying the Clear bin

TM

Turn power off and unplug before emptying the bin. Failure to do so could result in
electric shock or personal injury.
Empty as soon as the dirt reaches the level of the max mark - do not overfill.
Do not use the machine without the clear bin

TM

in place.

Cleaning the Clear bin

TM

Do not use detergents, polishes or air fresheners to clean the clear bin

TM

.

Do not immerse the whole cyclone in water.
Do not put bin in a dishwasher.
Ensure bin is completely dry before replacing.
To clean the shroud (if necessary), be sure the bin has been emptied and bin base
is open. Separate the clear bin

TM

and clean shroud with a cloth or small brush to

remove lint and dust.

Washing your filter

Check your filter regularly and wash at least every 3-6 months according to
instructions to maintain performance.
The filter may require more frequent washing based on individual vacuuming
habits. Check regularly.
Turn power off and unplug before washing the filter. Failure to do so could result in
electric shock or personal injury.
The filter may require more frequent washing if vacuuming fine dust.
Do not use detergent to clean filter.
Do not put the filter in the dishwasher, washing machine, clothes dryer, microwave
or near an open flame.
Air dry for at least 12 hours and ensure filter and case are completely dry before
refitting onto the machine.

Clearing blockages/brushbar

Please note: clearing blockages is not covered by your machine’s limited warranty.
Turn power off and unplug before checking for blockages. Failure to do so could
result in electric shock or personal injury.
If any part of your machine becomes blocked, it may overheat and then
automatically shut off. Unplug machine and leave to cool down. Clear blockage
before restarting.
If brushbar becomes obstructed, turn power off and unplug before checking for
blockages. Remove the blockage and press the RESET button located on the top
of the cleaner head before restarting vacuum.
Please ensure machine is upright before removing hose or airway inspection ports.
Beware of sharp objects when clearing blockages.
Refit all parts of the machine securely before using it.

SA

VE THESE INSTRUCTIONS

THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONL

Y

18860_OPS_MANUAL_UPDATE_FOR_LEGAL_COPY_DC18_5YR_QUICK_AMEND.qxd 5/11/07 10:34 Page 4

Advertising