English – Vitek VT-3625 User Manual
Page 8
When pressed for more than 1 second, they act
as TITLE and BROWSE buttons.
12.Automatic search (A/PS)
When pressed momentarily, the radio tuner
scans each preset station.
When the signal level is higher than the signal
reception threshold, the radio stays tuned to
that preset station for 5 seconds and then con-
tinues scanning.
When pressed for more than 1 second, the fre-
quencies of the 6 radio stations with the
strongest signals will be saved into the preset
memories. You must use the preset buttons (4)
to select one of these stations.
When the AS operation has ended, the radio will
conduct a scan of preset stations.
13.Operating the audio equalizer (EQ)
Press the EQ button repeatedly to cycle through
the five equalizer operating modes: Pop, Rock,
Classical, Neutral or DSP Off.
14.SCAN Automatic Tuning
This button works like a radio scanner.
Operating in this mode is like a usual search,
except that a 5 second delay occurs at each sta-
tion found in the RADIO SCAN mode.
15.MUTE button
Press this button to quickly turn off the sound.
Press it again to return to the previous volume
level.
16.Liquid Crystal Screen
The liquid crystal screen displays the current
status of the device.
17.Open button ( )
Press this button to slide down the front panel.
Press it again to return the panel to the closed
position.
LOCATION OF CD CONTROLS
11.TRACK/SEARCH button
Forward and reverse track searching (or
changing songs)
Press the SKIP (
or
) buttons during
playback to change to the desired track (song).
....REVERSE
....FORWARD
Press and hold the SKIP (
or
) buttons
during playback to listen to the disk at high
speed. Upon finding the desired place on the
disc, release the button. Normal playback will be
restored. When the CD/MP3 disc ends, the sys-
tem automatically switches to radio mode.
18.CD slot
19.CD eject button
Press the EJECT button to remove the CD.
20.Pause button
Press the PAU (20) button during playback to
temporarily stop playback. Press it again to con-
tinue playback.
21.Intro mode playback (Preliminary playback
of all tracks)
When this button is pressed, the INT ON indica-
tor appears on the display and each track on the
disc is played for several seconds. Press this
button again to stop intro mode playback and
listen to the current track.
22. Repeat playback button RPT
When this button is pressed, the RPT ON indica-
tor appears on the display and the current track
will be repeated non-stop until the repeat mode
is deactivated by pressing the RPT button again.
23.Random playback mode RDM
When this button is pressed, the RDM ON indi-
cator appears on the display and each track on
the disc will be played in random order not
sequential order. Press the RDM button (23)
again to deactivate the RANDOM playback
mode.
24, 25. Selecting 10 tracks up/down: (For MP3
discs)
M5: 10 tracks down / M6: 10 tracks up
CHOOSING MP3 FILES
1. Searching for a track:
Press the A/PS button to activate the track
search.
Press the SEL button; the first number will start
to blink.
Use the VOL
/
VOL knob to choose the
first number of desired track.
Press SEL to set the first number; the second
number will start to blink.
Use the VOL
/
VOL knob to choose
the 2nd and 3rd number accordingly.
The desired track will automatically be played.
2. File name search:
Press A/PS twice; file search mode will be acti-
vated.
Press SEL; the first directory is displayed.
Use the VOL
/
VOL knob to choose the
desired directory.
ENGLISH
8
3625_4l.qxd 29.03.05 16:39 Page 8