Daewoo DLT-46U1HZ - Manual (Page 29)

29
Setting Up TV Stations
Manual tuning
1. Press the Number buttons(0~9) or the “ PR ” but-
ton to select a programme number you want.
2. Locate the selection bar on the Manual tuning at the
Install menu.
• Press the “MENU” button to select the Install menu.
• Move the selection bar to the Install menu with “ / ”
buttons.
• Place the selection bar on Manual Tuning and press
the “ ” button.
3. Press the “ / ” buttons.
•
A tuning screen will appear and the cursor will move
from left to right or from right to left. If you want to
stop tuning press the “MENU” button.
• After searching a station, you must press the “OK” but-
ton to store the Program.
Note :
• If you are unable to get any programs using Auto Tuning because of a poor reception of the broadcasting signal,
it may still possible to store the channels using Manual tuning.
• If present channel is SECAM L/L’, TV set search SECAM L/L’. And if present channel is not SECAM L/L’, TV set search all
channels except SECAM L/L’ (this is only applicable when receiving french broadcasts)
VOL PR / PAGE
VOL PR / PAGE
OK /
SELECT
VOL PR / PAGE
VOL PR / PAGE
OK /
SELECT
VOL PR / PAGE
VOL PR / PAGE
OK /
SELECT
Auto Tuning
Manual Tuning
Setup
Edit
Position Access Exit
Picture
Screen
Sound
Function
Install
DVB
Pr Change Access Store Exit
Manual Tuning
PR 0 PAL/SECAM