Nexen TA100 964400 - Manual (Page 6)

2
FORM NO. L-20292-C-0700
TA110 GENERAL DIMENSIONS
FIGURE 2
ELECTRICAL CONNECTIONS
NOTE
Make electrical connections as shown in Figures 3 through 6 for the type of load sensor used. To maintain NEMA 12
strain relief ratings, the cables must have a diameter in the range of 0.161-0.314 inches. Unused strain relief holes
must be plugged.
FIGURE 3
TYPE CFL LOAD SENSORS FIGURE 4
TYPE SW LOAD SENSORS
WARNING
The TA100A and TA110A
are powered by 24VDC and
will be damaged by
110VAC.
SHIELD