Daily use, Programme selection, Picture control – Daewoo DSL-17W1T User Manual
Page 12: Switching on and off, Status, Direct selection, Up/down selection, Smart picture selection, Switching on, Switching off
![background image](/manuals/74548/12/background.png)
ENGLISH
Daily Use
17
Daily Use
16
Programme Selection
The set has 100 programme numbers, PR00..PR99.
DIRECT SELECTION
The NUMBER buttons are used for direct programme selection.
To select a two-digit programme, press the second numbered button within 2 seconds.
UP/DOWN SELECTION
You can also select a programme by pressing step by step the UP/DOWN buttons.
Picture Control
1. Call up the Picture menu.
2. Select and adjust the level of each function:
“Brightness”, “Contrast”, “Colour”,
“Sharpness”.
The adjusted levels are stored automatically in
Favourite mode.
NOTE:
Tint is displayed only when receiving a NTSC
signal.
Only Brightness and Contrast are displayed in
PC mode.
SMART PICTURE SELECTION
When you press the PICTURE button(
)
repeatedly, you can call up four pictures settings;
Normal
Bright
Dark
Favourite
Normal
Select Adjust Exit
P i c t u r e
B r i g h t n e s s
7 5
S o u n d
C o n t r a s t
5 0
F e a t u r e s
C o l o u r
3 0
S e t u p
S h a r p n e s s
4 6
T i n t
0
Z o o m
1 6 : 9
-
+
-
+
-
+
-
+
-
+
Switching On and Off
SWITCHING ON
1. If the Indicator is not lit, then the TV set is powered off.
You must press the
/OFF button on the TV set.
The set will switch to stand-by mode and then the Indicator will illuminate in Red.
2. Press the
/OFF button, UP/DOWN button or NUMBER button on the remote controller or
UP/DOWN button on the TV set.
The TV set will be switched on and then the Indicator will change to Green.
SWITCHING OFF
1.Press the
/OFF button on the remote controller to return the set to its stand-by mode.
The Indicator will illuminate in Red.
2.Press the
/OFF button on the TV set to switch the TV set off completely.
NOTE:
If you don’t use the set for extended periods of time, unplug the AC cord from Power outlet.
Status
The STATUS button(
) is used to display the current
status; Mode (AV, Component, PC) and Signal
information for 2 seconds.
In TV mode, the Programme number and Station Name,
Sound mode are displayed.
AV1
PAL 50Hz/4.43MHz
PR 12 - - - - -
NICAM Stereo
DSL-15D1T PAL(‡»
˙ )GB 03.11.27 5:24 PM ˘
` 16 mac001 1200DPI 80LPI