Naim Audio Mu-so - Manual (Page 9)

7
2. Network Connection
Diagram 8
Setup web page - Network
2.2 Wired Network Connection.
To connect mu-so to a local network using a wired
connection follow the steps below:
• Disconnect mu-so from mains power.
• Connect mu-so to your local network router using a
standard Ethernet cable.
• Re-connect mu-so to the mains power supply and wake
it from standby by touching its display Standby icon or
pressing the handset Standby button.
After a few moments mu-so should be available for
streaming on your home network. The mu-so side-panel
indicator will illuminate white.
Note: Mu-so can be configured to use a static IP address
if required via the Advanced Settings tab on its setup
page. Diagram 8 illustrates the setup page.