Digimate LTV-2007 - Manual (Page 19)

18
‧ Check whether remote control is properly being pointed at
the television's remote control sensor window.
‧ Check for any obstacle between the remote control and the
remote control sensor window.
‧ Check that the remote sensor window is not under strong
fluorescent lighting.
There is no picture or
sound, just noise ‧ Make sure the antenna cable is properly connected.
‧ Consider whether TV signals are being properly received.
Picture is not clear
‧ Make sure the antenna cable is properly connected.
‧ Consider whether TV signals are being properly received.
No sound
‧ Check whether you have selected Mute for Audio setting.
‧ Make sure the volume is not set to minimum.
‧ Make sure that headphones are not connected.
‧ Check cables for disconnection.
Antenna
Symptoms Possible Causes
The picture is not
sharp or the
picture moves
‧ The reception may be weak.
‧ The state of the broadcast may also be bad.
‧ Make sure the outside antenna is not disconnected.
‧ Make sure the antenna is facing the right direction.
The picture is
doubled or tripled
‧ Make sure the antenna is facing the right direction.
‧ There may be reflected electric waves from mountains or
buildings.
The picture is
spotted
‧ There may be interference from automobiles, trains, high voltage
lines, neon lights, etc.
‧ There may be interference between the antenna cable and power
cable. Try positioning them further apart.
There are stripes
on the screen or
colors fade
‧ Is the television receiving interference from other devices?
Transmission antennas of radio broadcasting stations and
transmission antennas of amateur radios and cellular phones
may also cause interference.
‧ Use the television as far apart as possible from devices that may
cause possible interference.