Naim Audio UnitiServe - Manual (Page 18)

16
Operation - The Display Inter face
The number in the right hand column corresponds to the
number of items in the music collection above which the
selected alphabetic segmentation is implemented. The
number can be adjusted for each segmentation option.
Language: Select Language to specify the interface
language that the UPnP™ playback device will display
when accessing the UnitiServe-SSD.
Compatibility: Select Compatibility to specify the audio
data Stream Format that the UnitiServe-SSD will stream to
the UPnP™ playback device and to switch CD artwork
transmission to the playback device
on or off .
The Stream Format options available are Native ,
44.1kHz WAV , WAV Decode , 24bit / 96kHz Max and Best
Compatibility :
Native: Streams audio files in the same format as they are
stored.
44.1kHz WAV: Converts streamed files to CD format.
WAV Decode: Converts files to WAV format while retaining
their native sample rate and bit depth.
24bit / 96kHz Max: Converts very high sample rate files
(>96kHz) to 96kHz to ensure they can be played at the
highest possible sample rate on playback hardware that
supports a maximum of 96kHz.
Best Compatibility: Enables the UPnP™ playback device
and the UnitiServe-SSD automatically to negotiate the best
compatible format.
Note: Native stream format offers the highest potential
audio quality. The appropriate choice will depend on the
capability of the playback hardware. Select Native initially
and check that the playback hardware operates correctly
with all stored file formats. If it fails to operate at any time
select WAV Decode. If it still fails occasionally select Best
Compatibility, 24bit / 96kHz Max or finally 44.1kHz WAV.
Reset to Defaults: Select Reset to Defaults to return the
UnitiServe-SSD UPnP™ settings to their defaults.
4.8.8 System Status
Selecting System Status displays a list of current system
status and setup parameters.