Lenco BTE-010 - Manual

4. Product specification
5. About BTE-010
6.Charging Earphone
1.Built-in rechargeable Lithium battery.
2.It must take 4 hours when the first time charging.
3.Connect the charger cable to the charger connector. The Red indicator light
is displayed during charging. Charging the battery fully may take about 2
hours.
4.When the battery is fully charged, the Red indicator light will be off.
The fully charged battery has power for up to 5 hours of talking time, up to 4.5
hours of music playing time, up to 100 hours of standby time.
8. Switch on or off
1.Press and hold the multifunction key for about 3 seconds, the Blue indicator
light is displayed. This shows the earphone is power on.
2.Press and hold the multifunction key until the Red indicator light is displayed.
This shows the earphone is power off.
If your phone supports the A2DP Bluetooth profile and has a music player
feature, you can use the phone to make and receive calls, and to play music
with the headset.
1.Ensure that your phone or music device is on and the headset is off.
2.Press and hold the multifunction key for about 5 seconds until the Red
indicator light and the Blue indicator light starts to flash quickly.
3.Activate the Bluetooth feature on your phone or music player, and set it
to search for Bluetooth devices.
4.Select the headset BTE-010 from the list of founded devices on your
phone or music player.
5.Enter the passcode 0000 to pair and connect the headset to your device.
If your device does not have a keypad, it may use this passcode by default.
6.When the headset is connected to your device and is ready for use, the
Blue indicator light will flash every 2 seconds.
9. Pair the headset
7. Wearing
user's manual
1. Welcome
2. Introduction
3. Packing List
Us r m nu l
e a a
Bluetooth Hi-Fi
Stereo earphone
Charger Manual
1.Multifunction key
with switch on/off,
Answer, End, Pair,
Play and Pause.
2.Volume + key
3.Volume - key
4.Microphone
5.Loudspeaker
6.Previous key
7.Next key
8.Charge connector
Bluetooth is a new short-distance wireless communication technology. Any
devices with Bluetooth feature, such as mobile phones, PDA, PC, headsets,
mouse, keypads, keyboards, printers and other mobile fittings, can work as
wireless devices. Designed with global standards, Bluetooth technology applies
to internationally certified ISM bandwidth. The frequency band ranging from
2.4 GHz to 2.48 GHz is divided up into 79 channels by way of frequency hopping
up to 1600 times for data transmission with a distance of 10 meters.
The manual provides instructions on how to set and operate the BTE-010 Bluetooth
headset , please read this manual carefully before use.
The accessories are subject to change for improving product
performance without prior notice. The real products prevail.
Bluetooth specification: Support V2.1+EDR with Handsfree Profile
1.5., Headset Profile 1.1 and A2DP profile 1.2. (Class II)
Standby time: 100 hours
Talking time: 5 hours
Playing music time: 4.5 hours
Distance: up to 10 meters
Weight: 16 g
Certification: CE; ROHS; REACH
BTE - 010
For information and support, www.lenco.eu