Socket for onboard diagnostics obd, Caring for your vehicle, Socket for onboard diagnostics – Mini 2008 Cooper Convertible User Manual

Page 128: Obd 126, Caring for your vehicle 126

Advertising
background image

126

SOCKET FOR ONBOARD DIAGNOSTICS OBD

CARING FOR YOUR VEHICLE

Primary components of exhaust emissions
can be checked by a device via the OBD
socket.

This socket is located to the left of the
driver's side, on the bottom of the instru-
ment panel underneath a cover.

Exhaust emission values

The warning lamp comes on. The
exhaust emissions have deterio-
rated. Have the vehicle checked as

soon as possible.

Canadian models display this
warning lamp.

Under some circumstances, the lamp will
flash. This indicates severe engine misfir-
ing. In this case, you should reduce your

speed and visit your nearest MINI Dealer as
soon as possible. Severe engine misfiring
can quickly lead to serious damage of emis-
sions-related components, especially the
catalytic converter.

If the fuel filler cap is not properly
tightened, the OBD system may con-

clude that fuel vapors are escaping, causing
an indicator to light up. If the filler cap is
then tightened, the indicator should go out
within a few days.

<

Suitable car-care products

Use the cleaning and car-care prod-
ucts available at your MINI Dealer.

<

Washing your vehicle

You can wash your new MINI or MINI Con-
vertible in automatic car washes from the
beginning. Preference should be for cloth
car washes. If, due to lack of availability,
brush car washes must be used, modern
systems with soft brushes should be given
preference.

When using steam cleaners or high-
pressure cleaners, maintain sufficient

distance to the vehicle and do not exceed a
maximum temperature of 140

7/606. If

the jet is too close or the pressure is too
high, this can lead to damage or initial
damage that can develop into more serious
damage. Water that enters vehicle compo-
nents can lead to damage over the long
term.
After washing the vehicle, apply the brakes
briefly to dry them, otherwise water can
reduce braking efficiency over the short
term and the brake rotors can corrode.
Switch the rain sensor off when passing
through an automatic car wash, refer to
page

63

. Failure to do so could result in

Online Edition for Part no. 01 41 0 014 845 - © 08/07 BMW AG

Advertising
This manual is related to the following products: