Using song list mode r – Saab 2005 9-7X User Manual

Page 191

Advertising
background image

B

(CD): Press this button to play a CD when listening

to the radio. The CD symbol will appear on the display
when a CD is loaded.

AUTO EQ (Automatic Equalization): Press EQ to
select an equalization setting while playing a CD.
The equalization will be set whenever a CD is played.
See “EQ” listed previously for more information.
If you select an EQ setting for your CD, it will be
activated each time you play a CD.

Using Song List Mode

R

(Song List): The six-disc CD changer has a

feature called song list. This feature is capable of saving
20 track selections.

To save tracks into the song list feature, perform the
following steps:

1. Turn the CD player on and load it with at least one

CD. See “LOAD CD” listed previously in this section
for more information.

2. Check to see that the CD changer is not in song

list mode. S-LIST should not appear on the
display. If S-LIST is present, press the song list
button to turn it off.

3. Select the desired CD by pressing the numbered

pushbutton and then use the SEEK SCAN right
arrow to locate the track to be saved. the track will
begin to play.

4. Press and hold the song list button to save the

track into memory. When the song list button is
pressed, one beep will be heard immediately. After
two seconds of continuously pressing the song
list button, two beeps will sound to confirm the track
has been saved.

5. Repeat Steps 3 and 4 for saving other selections.

S-LIST FULL will appear on the display if you try to save
more than 20 selections.

To play the song list, press the song list button.
One beep will be heard and S-LIST will appear on the
display. The recorded tracks will begin to play in
the order they were saved.

Seek through the song list by using the SEEK SCAN
arrows. Seeking past the last saved track will return to
the first saved track.

3-79

2005 - Saab 97X Owner Manual

Advertising