TOYOTA 2012 Yaris Hatchback User Manual

Page 271

Advertising
background image

292

4-3. Do-it-yourself maintenance

■

License plate light

Remove the cover.

Insert a properly sized screw-
driver into the hole of the cover,
and ply off the cover as shown in
the illustration.

To prevent damaging the vehicle,
wrap the screwdriver with a tape.

Remove the light bulb.

■

Lights other than the above

If the high mounted stoplight has burnt out, have it replaced by
your Toyota dealer.

■

LED high mounted stoplight

The high mounted stoplight consists of a number of LEDs. If any of the LEDs
burn out, take your vehicle to your Toyota dealer to have the light replaced.

■

Condensation build-up on the inside of the lens

Contact your Toyota dealer for more information in the following situations.
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.

●

Large drops of water have built up on the inside of the lens.

●

Water has built up inside the headlight.

■

When replacing light bulbs

→P. 284

Advertising