TOYOTA 2011 Prius - Manual (Page 428)

404
3-6. Other interior features
PRIUS_U (OM47685U) DVD
n Programming an entry gate (for U.S.A. owners)/Programming
all devices in the Canadian market
Point the remote control for the device 1 to 3 in. (25 to 75 mm)
from the HomeLink
® buttons.
Keep the indicator light on the HomeLink
®
in view while programming.
Press and hold the selected HomeLink ® button.
Press and release the device’s remote control button at two
second intervals, and release both the HomeLink
® button and
the device’s remote control button when the HomeLink ® indi-
cator begins to flash rapidly.
Test the operation of the garage door by pressing the newly
programmed HomeLink
® button. Check to see if the gate/
device operates correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink
® buttons.
Operating the HomeLink ®
Press the appropriate HomeLink ® button. The HomeLink ® indicator
light on the HomeLink ® transceiver should turn on.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5