Side window reversing feature, Opening and closing the side windows, Opening and closing – Mercedes-Benz 2013 CLA Class User Manual

Page 89: Side windows

Advertising
background image

Side window reversing feature

The side windows are equipped with an auto-
matic reversing feature. If a solid object
blocks or restricts a side window during the
closing process, the side window opens again
automatically. The automatic reversing fea-
ture is however only an aid and is no substi-
tute for your attention when closing a side
window.

G

WARNING

The reversing function does not react:

R

to soft, light and thin objects, e.g. small fin-
gers

R

over the last 4 mm of the closing movement

R

during resetting

R

when closing the side window again man-
ually immediately after automatic reversing

This means that the reversing function cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
When closing make sure that no parts of the
body are in the closing area. If someone
becomes trapped, press the switch to open
the side window again.

Opening and closing the side win-

dows

The switches for all side windows are located
on the driver's door. There is also a switch on
each door for the corresponding side window.
The switches on the driver's door take prec-
edence.

:

Front left

;

Front right

=

Rear right

?

Rear left

i

The side windows cannot be operated

from the rear when the override feature for
the side windows is activated (

Y

page 63).

X

Turn the key to position

1 or 2 in the ignition

lock.

X

To open: press the corresponding switch.

X

To open fully: press the corresponding

switch beyond the point of resistance.
Automatic closing is started.

X

To close: pull the corresponding switch.

X

To close fully: pull the corresponding

switch beyond the pressure point. Auto-
matic closing is started.

X

To interrupt the automatic opening/

closing: press/pull the corresponding

switch again.

i

If you press the switch beyond the point

of resistance, an automatic opening/clos-
ing process is started in the corresponding
direction. You can stop automatic opera-
tion by pressing again.

i

You can continue to operate the side win-

dows after switching off the engine or
removing the key. This function remains
active for five minutes or until the driver's
or front-passenger door is opened.

Side windows

87

Opening and closing

Z

Advertising