Combination switch, Lights and windshield wipers, Exterior lighting – Mercedes-Benz 2011 E Class Sedan User Manual

Page 122

Advertising
background image

Fog lamps and rear fog lamps

Front fog lamps
Only vehicles with front fog lamps have the
"fog lamps" function.

G

Warning!

If you suspect that driving conditions will be
foggy, turn the light switch to L before you
start your journey. Otherwise, your vehicle
may not be visible and you could endanger
yourself and others.

X

To switch on the front fog lamps: turn

the key in the ignition lock to position

2 or

start the engine.

X

Turn the light switch to L or c.

X

Press the N button.
The green N indicator lamp in the
instrument cluster lights up.

X

To switch off the front fog lamps: press

the N button.
The green N indicator lamp in the
instrument cluster goes out.

i

If you switch the engine off (key in

position

1 in the ignition lock) and then

restart it, the previous fog lamp settings are
restored.

Rear fog lamp

X

To switch on the rear fog lamp: turn the

key in the ignition lock to position

2 or start

the engine.

X

Turn the light switch to L or c.
When the light switch is set to c, the
rear fog lamp only lights up if the low-beam
headlamps are switched on.

X

Press the R button.
The yellow R indicator lamp in the
instrument cluster lights up.

X

To switch off the rear fog lamp: press the
R button.
The yellow R indicator lamp in the
instrument cluster goes out.

i

If you switch the engine off (key in

position

1 in the ignition lock) and then

restart it, the previous rear fog lamp
settings are restored.

Combination switch

Turn signals

:

High-beam headlamps

;

Right turn signal

=

High beam flasher

?

Left turn signal

X

To indicate briefly: press the combination

switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.

X

To indicate: press the combination switch

beyond the pressure point in the direction
of arrow ; or ?.

High-beam headlamps

X

To switch on the high-beam headlamps:

turn the key in the ignition lock to position
2 or start the engine.

X

Turn the light switch to L or c.

X

Press the combination switch beyond the
pressure point in the direction of
arrow :.
In the c position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.

120

Exterior lighting

Lights and windshield wipers

BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi

Version: 3.0.3.6

2010-05-20T13:33:46+02:00 - Seite 120

Advertising