Subaru 2003 Baja - Manual (Page 204)

BAJA U.S.A..A2310BE–A
6-28
HB6053BA
5. Adjust the alignment of the crossbar on the roof rails, and if avail-
able, use a T-30 torx
R bit and torque wrench and tighten the T-30
torx
R head screws to 30 to 35 inch lbs. (3.4 to 4.0 N-m, 0.35 to 0.41
kg-m) of torque (or tighten securely with the torx
R wrench provided).
Rear crossbar:
HB6049BB HB6050BA
Install the rear crossbar in the same manner as the front crossbar.
NOTE
The rear crossbar should be positioned just in front of the rear
radius in the roof rail.
NOTE
Before each use of the roof crossbar, make sure the four T-30 cross-