NISSAN 2011 Cube - Manual (Page 105)

Black plate (103,1)
Model "Z12-D" EDITED: 2010/ 9/ 27
The digital clock (in the audio unit) displays time
when the ignition switch is in the ACC or ON
position.
The clock ON or OFF mode can be selected.
If the power supply is disconnected, the
clock will not indicate the correct time.
Readjust the time.
SIC4131
Type A
ADJUSTING THE TIME
Type A
Push the CLOCK button
*
1 to turn the clock on
or off.
1. Push and hold the CLOCK button
*
1 until
the clock display starts to flash.
2. Push the SEEK/TRACK button
*
2 to adjust
the hours.
3. Push the TUNE/FF·REW button
*
3 to
adjust the minutes.
4. Push the CLOCK button
*
1 again to exit
the clock set mode.
The display will return to the regular clock
display after 5 seconds.
CLOCK (if so equipped)
Instruments and controls 2-31