NISSAN 2008 Xterra User Manual
Page 222
Blocking wheels
Place suitable blocks
᭺
1
at both the front and
back of the wheel diagonally opposite the flat tire
᭺
2
to prevent the vehicle from moving when it is
jacked up.
WARNING
Be sure to block the wheel as the vehicle
may move and result in personal injury.
Getting the spare tire and tools
1. Fold the rear bench seat cushion forward.
Refer to “Folding the 2nd row bench seat” in
the “Safety–Seats, seat belts and supple-
mental restraint system” section earlier in
this manual.
2. Remove the jack and jacking tools.
3. Find the oval-shaped opening above the
middle of the bumper. Pass the T-shaped
end of the jack rod through the opening and
direct it toward the spare tire winch, located
directly above the spare tire.
CAUTION
Do not insert the jack rod straight as it is
designed to be inserted at an angle as
shown.
WCE0044
LCE0115
LCE0117
6-4
In case of emergency
੬
REVIEW COPY—
2008 Xterra (xtr)
Owners Manual—USA_English (nna)
06/26/07—debbie
੭