Dual XDMA7650 - Manual (Page 16)

16
XDMA7650 OPERATION
USB Operation - MP3/WMA Files
Play MP3/WMA files from most mass storage devices by
connecting them to the XDMA7650's USB port.
When a USB device is first connected, “READING” will
appear in the display and playback will begin momentarily.
Depending on the number of files and folders, it may take
several seconds for the device to begin playing. If no valid
MP3/WMA files are detected, “NO FILE” will be displayed
and the last mode will be resumed.
Press TRACK
ll
to skip to the beginning of the next
track. Press TRACK
nn
to return to the beginning of the
current track. Pressing TRACK
nn
again skips to the
beginning of the previous track.
Press and hold TRACK
ll
or TRACK
nn
to fast
forward or reverse a track.
Press
l
/ II to temporarily stop USB playback.
Press
l
/ II again to resume playback.
Press SELECT to enter the USB file/folder search mode.
"USB SEARCH" will be displayed. A list of all the folders
from the USB device will be displayed.
Note: Any files located in the root directory will be located in
the folder named "ROOT". Press SELECT to view the files on
the root folder.
Turn the volume knob to cycle through all the folders on the
device and press SELECT to choose the desired folder. The
list of files in the selected folder will be displayed. Turn the
volume knob to cycle through the list of files.
Once the desired song is displayed, press SELECT to begin
playback of the desired song.
Pressing ESC when viewing the contents of a folder will
return to the list of folders on the USB device. Press ESC
again to exit the search menu.
Note: Due to differences in USB device transfer speeds, it is
recommended to limit each folder to less than 30 songs.
Connecting a USB Device
(sold separately)
Playing Music
Track Select
Fast Forward and
Reverse
Pause
File Search
Step 1
Step 2
Step 3