DigiTech RP80 - Manual (Page 26)

Panner SP (Speed) dP (Depth)
Vibrato SP (Speed) dP (Depth)
Rotary SP (Speed) dP (Depth)
YaYa™ PD (Expression Pedal acts as a YaYa Effect when engaged)
AutoYa™ SP (Speed) dP (Depth)
Envelope Filter ES (Sensitivity)
Detune LE (Level of the Detuned signal)
Pitch Shift LE (Level of the Pitch Shifted signal)
Whammy™ hy (Expression Pedal acts as a Whammy pedal)
Delay dL (Delay Level) dF (Delay Feedback - 99 = Infinite Repeat*)
Reverb rL (Reverb Level)
3. After selecting the parameter to be linked to the pedal, you can set the minimum and
maximum control range for that parameter. A newly assigned parameter’s default range will
be 1 to 99. To modify this range, do the following:
A. Press the Right EDIT/EFFECT button.The Display will flash between HE (heel)
and the current maximum value. Select the desired value for the heel back position
by pressing either of the left or right VALUE/ MASTER VOLUME buttons.
B. Press the Right EDIT/EFFECT BUTTON once more and the Display will flash
between to (toe) and the current maximum value. Select the desired value for the
toe down position by pressing either the left or right VALUE/MASTER
VOLUME buttons. (The value range for all assignable parameters is 1-99)
4. Store your Expression Pedal assignment values to your Preset. Storing a preset also saves
the current pedal position. See page 13 for information on the storing procedure.
* Infinite Repeat creates a playback loop of whatever signal was played into the delay.
22