DXG Technology DXG-502 - Manual (Page 66)

65
Use the TV-Out function provided by the camera to transfer the images to a television.
Please follow these steps:
Before getting started, set the Video Out setting to either NTSC or PAL, according to your regional
setting (The United States uses NTSC). Please refer to the Setup Mode/Video Out.
Use the video cable provided to connect the camera with the televsion. Switch to the Setup Mode,
enter under (Display) and press the
button. When the camera LCD turns off; the
television will receive the data and display the images. You can then use the camera as usual.
Remember to switch the display back to the camera screen before disconnecting the video cable, or the
camera screen will remain off.
!
Because of different TV formats, it is normal for pictures to be
cropped when displayed on the television screen.
Video Out