Digital Spectrum NuVue 561 - Manual

Setup
If you want to change the display mode, follow the steps below.
On Screen Menu - The On Screen Menu is used to change settings such as
slide duration, EXIF info, etc. as shown below:
Transferring Pictures from the PC to NuVue
Connect the USB cable to the NuVue then connect the other end to the USB port on
the PC. After the frame is connected, a message will display on the screen of the
NuVue.
Go to “My Computer” on your PC. You will notice that there are 4 more drive letters
on your PC. This is from the card read on the NuVue. Each card slot represents 2 drive
letters.
Locate the drive letter that represents your card, and drag and drop the desired picture
to the card in the NuVue. After you have completed loading your pictures, disconnect
the NuVue from the PC and view you picture. NuVue 561
User Manual
1862-N5-U3-4 - www.dsicentral.com