Desa 10401 - Manual (Page 3)

3 113267 www.desatech.com
STAPLES
Staple Sizes
Staple Brand 1/4" 5/16" 3/8"
PowerFast ® P-A11-1/4 P-A11-5/16 P-A11-3/8
36504A 36505A 36506A
Arrow ® 504 505 506
Bostitch ® TRA704 TRA705 TRA706
Duo-Fast ® A11 04C A11 05C A11 06C
Rapid ® A11 1/4 A11 5/16 A11 3/8
Senco ® H04 H05 H06
HOW TO ASSEMBLE
Reverse the above procedure. Align the
staple driver with the channel opening
at the head of the magazine assembly.
Compress magazine assembly slightly
to align holes for the hinge screw and
insert screw.
Note: The hinge screw may be inserted
from either side of handle.
Fasten nut onto hinge screw securely.
PowerFast ® is a registered trademark of DESA IP, LLC. Arrow ® is a registered trademark of
Arrow Fastener Company, Inc. Bostitch ® is a registered trademark of Stanley-Bostitch, Inc.
Duo-Fast ® is a registered trademark of Duo-Fast Corporation. Rapid ® is a registered
trademark of Isaberg Rapid AB. Senco ® is a registered trademark of Senco Products, Inc.
Figure 3 - Compress Magazine Assy.
Magazine Assembly
Head Assembly
Compress
4. Pull (remove) hinge screw from tool
handle.
5. Release magazine assembly and
slide forward from head assembly
(see Figure 4).
The hammer tacker is now completely
apart and ready for cleaning. Also, jams
may be cleared when taken apart. Take
care not to damage the exposed staple
driver.
Figure 4 - Removing Magazine Assy.
Pull
Magazine Assembly