SoundMax SM-CMD3004 - Manual (Page 17)

17
Clock display
Press the CLK button to display the clock. To set the clock press and hold the button until the hour becomes white
in color. Rotate the VOL knob to set hours, then press the VOL knob for the minutes to become white in color
and rotate the VOL knob to set. Press the CLK button again or leave the unit idle for new setting to effect.
RESET
Press OPEN button to open the panel. Then press the RESET button with some sharp object (pin or ball-point pen)
to restore factory settings.
Radio Operations
Choose Radio Band
Press the MOD/MUT button to access the radio function. Then press the BND/SUB/NP button on the front panel
or BND/SYS button on the RC to choose among the five radio bands: three FM Bands (FM1, FM2, and FM3) and
two AM Bands (AM1, and AM2). Each of the five bands can store up to six preset stations, for a total of 30 preset
memory stations.
Radio Tune / Seek Function
In Radio Mode, press Seek +/- button to manually adjust the radio frequency. Press and hold Seek +/- button
for more than 1 second, the radio will seek to the next up or down strong and clear frequency station. Repeat
this action to seek for other desired stations.
Mono/Stereo Reception Control
In FM radio mode, press the SEL button repeatedly to select stereo or mono reception. “ST ON” will show on the
display indicating that stereo reception is received. Improvement of reception of distant stations can be done by
selecting “ST OFF” operation which may cut down some reception noise.
Local/Distance Control
In radio mode, press the SEL button repeatedly to select local or distance reception.
a. “LOC ON” showing on the display, means local reception is turned on;
b. “LOC OFF” showing on the display, means distant reception is turned on.