ABtUS AV815 - Manual (Page 7)

*Specifi cations are subject to changes without notice.
INSTALLATION GUIDE
1. Assembly procedure-Installation of Suspension Rod
1.1 Install upper rod
Install the upper rod using M8x55 Socket
Cap Screw and M8 Self-Locking Nylon Nut,
Celing Mounting Plate
1.2 Install low rod
First align two holes on the lower rod at
the suitable holes on the upper rod, tighten
them with M8x55 Socket Cap Screw and
M8 Self-Locking Nylon Nut.