3 features – Agema AG7648 User Manual
Page 5
2
• Introduction
Chapter 1
1.3 Features
The following lists the main features of the AG7648 switch:
•
48 x 10GbE SFP+ ports
•
6 x 40GbE QSFP ports
•
1 x OOB Management
•
1 x Console port (RJ-45 type)
•
1 x USB port
•
Hot plugging redundant power supply support
•
3 Fan trays modules
•
Power supply LED / System / FAN status LED indication
•
Extensive system LED and per port LEDs
•
Internal power supply; Max output 460w
•
Standard 1U chassis high and Rack mountable in standard 19” racks
•
Alternate Store-Forward (ASF) mode - Cut-through is available to minimize the latency
•
720Gbps switching bandwidth (1440Gbps duplex)
•
Automatic address learning function to build the packet-forwarding information table. The
table contains up to 288K MAC addresses
•
12 MB of packet buffer memory
•
Support Jumbo Frame up to 12Kbyte
•
VxLAN and NVGRE tunneling support in hardware for network virtualization
•
Pre-loaded with Open Network Install Environment (ONIE) for automated loading of
compatible SwitchOS software