American Weigh Scales (AWS) MS-600 - Manual (Page 6)

MS-600
weighing mode. Calibration is complete!
IX. Troubleshooting
• Problem: Scale will not turn on
• Solution: Check the batteries
• Problem: Displayed weight fluctuates randomly
• Solution: Make sure your workspace is stable and
free of any air currents or vibration
• Problem: Displayed weight is inaccurate
• Solution: Perform a calibration adjustment
X. Error Codes
1. OUTZ - Zero range has shifted. Perform calibration
adjustment. If the problem persists, the load cell may
be permanently damaged due to overloading.
2. UNST - Scale is unstable. Use in a more stable
position.
3. HHHHH - Maximum capacity exceeded. Remove the
extra weight to avoid damaging the load cell.
4. L - Batteries are low. Replace the batteries.