Dual XDVD710 - Manual (Page 26)

XDVD710 OPERATION
5
Screen Setup Menu
System Standby
Press the SCREEN button to access the SCREEN setup mode
Select desired parameter you wish to change
Page will return back to previous screen after 10 seconds of inactivity or by
pressing the RETURN button
SCREEN Setup Menu matrix
To conserve the LCD backlight lifespan or to eliminate glare while night driving,
press STANDBY. The TFT screen will black out, however all other operations
continue to operate. Press any button except VOLUME or touch the screen again
to return to normal viewing.
•
•
•
Settings Default Options Function
Brightness 10 0 - 0
Press the  or  buttons on the remote or press the right
rotary once and rotate clockwise/counter-clockwise to adjust
the BRIGHTNESS to the desired setting
Screen Tilt 4 1 - 6 Select 1 to 6 to adjust the default tilt angle of the screen
Screen Saver On Off Select On to activate the screen saver, Off to deactivate
On
TS Calibrate No No Touch Yes to enter the Touch Screen calibration mode
Yes
Version Software version of unit
L
SCREEN Setup - Menu
L