American Weigh Scales (AWS) SHIP-330S - Manual (Page 2)

I. Operation
For the best results, only operate your scale on a flat
and stable surface.
1. Insert the included 9V battery into the battery
compartment, or plug the AC-Adapter into an available
wall outlet and plug the opposite end into the scale.
2. Press the “ON/OFF” key to turn the scale on.
3. Wait until the display shows “0.0” (zero) before plac-
ing any weight on the scale.
4. Carefully place the item(s) to be weighed onto the
weighing platform.
5. After a few seconds, the weight should stabilize and
you can now get your weight reading from the LCD
display.
6. Using the “MODE” key you can switch between
weighing units (lb, kg, lb/oz)
II. Tare Weighing
The Tare button resets the display to zero when weight
is on the scale, allowing you to subtract the weight of
a container.
1. Place the container you wish to use on the
platform.
2. When the readout stabilizes press the TARE key
once.
3. The display will reset to zero allowing you to now
add items to the container and obtain the weight of just
the contents (net weight).
III. Clock Setup
This scale has a built in clock feature.
1. When in clock mode (no weighing), press the SET
button once - “Hour” will begin to flash.
2. Press the “ ” button to increase the hour digit (hold
to go faster).
3. When you are finished setting the hour, press the
SET key again.
4. “Minute” will begin to flash on the LCD.
5. Press the “ ” button to increase the minute digit
(hold to go faster).
6. If you do not need to change any other settings, you
can keep pressing the SET key until you
return to clock mode.
IV. Specifications
Model AMWSHIP-150 AMWSHIP-330S
Capacity 150lb / 68kg 330lb / 150kg
Resolution 0.1lb / 0.05kg / 2oz 0.1lb / 0.05kg / 2oz
Weighing Units pounds (lb), kilograms (kg), pound & ounce (lb/oz)
Display
Blue Backlit LCD
Platform Dimensions (inches)
11.25 x 11.75 x 1.37
Power 1 (one) 9V or AC-Adapter (both included)
Weight