Atlona AT UHD SW 52 - Manual (Page 6)

6
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Tip (+)
Analog Audio
A captive screw analog audio connector is provided to ensure a more reliable and secure
connection. The captive screw connector supports balanced and unbalanced audio output.
Balanced audio connections use two signal wires and a ground to ensure the least amount of
interference to an audio signal over longer cable runs. Unbalanced audio connections use two wires
for shorter audio runs.
Important! With unbalanced connections a jumper is needed between ground and negative to reduce noise
Note: Pin outs may vary, please refer to the audio device’s manual to ensure a correct connection.
Important! When terminating cables, please ensure exposed adjacent wires do not touch. This may result in
a short that can damage connected devices.
XLR RCA
Sleeve ( Ground)
+
+ +
+ +
2 ( + )
3 ( - )
1 ( )
+ -
- -
- - -
L / R
BALANCED UNBALANCED
L / R
+ +