Atlona AT UHD CLSO 612 V2 - Manual (Page 27)

27
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command Feedback Description
Input [X] [Y] Input [X] [Y]
Input HDBT 2 Input [interface]* [index]*. Select input source video.
Ex: Select input to HDBT 2 video => Input HDBT 2
HDCPSetX [Y]
ex. HDCPSet2 off HDCPSetX Y
ex. HDCPSet2 off Sets HDCP mode of the HDMI ports
X = 1 / 2 / 3 / 4
[Y] = on / off / sta
PrefTimg [X] PrefTimg [X] Set preferred timing to EDID. X is 1-10 & sta
VGAPrefT [X] VGAPrefT [X] Set preferred VGA timing to EDID. X is 1-8 & sta
BNR [Y] BNR [Y] BNR [off/low/medium/high/sta].
Configure video block noise reduction
MNR [Y] MNR [Y] MNR [off/low/medium/high/sta].
Configure video mosquito noise reduction
RNR [Y] RNR [Y] RNR [off/low/medium/high/sta].
Configure video random noise reduction
PollAddInX [Y] PollAddInX [Y] PollAddIn [VGA/COMP/CVBS/SVIDEO]. Add source of analog polling.
Ex: Add COMP & SVIDEO => PollAddIn COMP,SVIDEO
If only command write “IPAddUser”, it will display all user list
PollDelInX [Y] PollDelIn [Y] PollDelIn [VGA/COMP/CVBS/SVIDEO]. Delete source of analog polling.
Ex: Delete VGA & CVBS & COMP => PollDelIn VGA,CVBS,COMP
OSD [Y] OSD [func/logo/info][on/off/sta]
Aspect [Y] Aspect [Y] Aspect [full/overscan/underscan/letterbox/panscan/follow/sta]
Sets video aspect function
OutAMute [Y] OutAMute [Y] OutAMute [on/off/sta]
Sets output audio mute of HDMI and HDBT
AUD In[X] Ai[Y] AUD In[X] Ai[Y] AUD In[X] Ai[Y] x: 1-6 Y: 5-6 or P
Replaces the selected input’s audio with the selected analog input (5
or 6) or sets it to pass through (p) normally
Ex. Replace input 2’s audio with analog 6 - Aud In2 Ai6
Ex. Pass through input 3’s audio normally - Aud In3 AiP
AutoSW [Y] AutoSW [Y] AutoSW [on/off/sta/VGAon/VGAoff/VGAsta]
Sets auto switch mode status
Factory Default: Sets auto switch to on with VGA auto switch to off
ASwPrePort [Y] ASwPrePort [Y] ASwPrePort [HDMI1/HDMI2/HDBT1/HDBT2/Previous]
Sets default auto switch port or sets to previous input
ASwOutTime [Y] ASwOutTime [Y] ASwOutTime [sec] Sec: 1-600 (default is 1 second)
Sets the delay time for how long the auto switching receives no signal
from the input before switching ports
Ex. Sets the auto switching delay time to 1 minute with no signal
before changing ports - ASwOutTime60
[X] preferred timing -
1 1280x800
2 1920x1080 3 1024x768
4 1280x720 5 1920x1200 6 1366x768
7 800x600 8 1600x900 9 2560x440
10 3840x2160 sta Read status
VGA [X] preferred timing -
1 1280x800
2 1920x1080 3 1024x768
4 1280x720 5 1920x1200 6 1366x768
7 800x600 8 1600x900 sta Read status
[Interface] index -
HDMI 1
HDMI 2 HDBT 1
HDBT 2 COMP 1 COMP 2
CVBS 1 CVBS 2 SVIDEO 1
SVIDEO 2 VGA 1 VGA 2