Atlona AT H2H 44M - Manual (Page 5)

5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Remote Control
Back Panel
1. Ethernet Port: Future feature (TCP/IP control) through firmware update. Not enabled at this time.
2. RS-232: Connect to this port for control from a computer or 3rd party controller.
3. Matrix IR IN: Used to control matrix I/O switching from a 3rd party IR control box or supplied
IR remote. Connect included IR receiver (see below) or mono IR cable (sold separately)
4. Firmware Update: Type B USB Port used for updating the matrix firmware only
5. HDMI Input Ports: Connect HDMI sources into these ports, such as DVD players, Blu-ray players,
computers, etc.
6. Zone dedicated ports
a. HDMI out port: Connect to a display or an AVR
b. Coax Out: Audio Loop-out for Amplifiers and AVRs
Compatible with PCM 2Channel, LPCM 5.1, Dobly Digital 5.1, and DTS 5.1
7. Power Port: Use included locking DC adaptor to power the matrix switcher
1
6 2 3 4 5 b a 7
IR Receiver
Output selection. Numbers correspond with the HDMI outputs
(1-4) on the matrix.
Input selection. Numbers correspond with the HDMI inputs (1-4)
on the matrix.
Arrow buttons are not functional for this product.