Atlona AT COMP150SR - Manual (Page 6)

2. Receiver Unit: AT-COMP150R
2.1. Input Panel
5. AUDIO MODE: See next section for more detail.
6. SYSTEM IN: Connect a CAT5e/6 cable and link to the SYSTEM OUT port on the Sender unit.
5 6
2.2. Output Panel
7 8
7. COMPONENT OUTPUT: Connect to a component video display.
8. AUDIO OUTPUT: Connect to analog audio speakers.
DIP Switch Position Audio Description
Pin1 Pin2
ON ( ) ON ( ) 2Ch Mono Set dip switch position on Sender unit and Receiver unit
to “ON” to output two channel mono audio. This is the
factory default.
1. Do not change the dip switch settings as this will result in poor audio quality.
2. Use shielded or even double shielded cables to get better audio quality
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5