Dual MXD55 - Manual (Page 5)

General Operation
5
MXD55 OPERATION
Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Press PWR or any other button (except eject) to turn the unit
on. Inserting a CD will turn the unit on automatically. Press
PWR to turn the unit off.
Press MODE to select between AM/FM tuner, weatherband
tuner, CD player and auxiliary input. Modes of operation are
indicated in the display.
Press BASS to activate and deactivate bass boost curve.
Activating this feature will enhance the bass frequencies
when listening to music at all volumes.
Adjust volume using rotary encoder (00-46).
Press and hold PWR for 3 seconds to program currently
selected volume level.
Press rotary encoder for 3 seconds to turn confirmation beep
on/off.
Press MUTE to silence the audio. Press MUTE again to cancel.
Press EQ to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Press DISP to select between clock and radio frequency
(tuner modes) or CD elapsed time/track (CD player mode).
With the unit on, press and hold DISP until clock begins to
flash, then release. Press TUNE
ll to adjust the hours and
TUNE nn to adjust the minutes. Press DISP momentarily to
save the selected time.
The clock will display 12-hour AM/PM time in USA frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
Faceplate Removal
Power On/Off
Mode
Bass Boost
Volume
Programmable
Turn-On Volume
Confirmation Beep
Mute
Preset EQ Curves
Display
Set the Clock
12/24-hour Clock