Desa C36TU User Manual

C36tu and c36to corner mantel and base, Assembly and installation instructions

Advertising
background image

If any wood pieces are missing or damaged, contact the

dealer where you purchased this mantel for replacement. If

hardware is missing or damaged, contact DESA Heating, LLC

at 1-866-672-6040 for referral information. You can also visit

DESA Heating, LLC’s web site at www.desatech.com.

WARNING: Follow guidelines of paint or finish

manufacturer. Use care when finishing or painting an

unfinished mantel (C36TU only). Do not finish or paint

mantel pieces near running heater or open flame. These

vapors are highly flammable.

IMPORTANT: If you are staining an unfinished mantel (C36TU

only), remove any sawdust, dirt or oils. This will prevent blem-

ishes from appearing under the stain. Stain mantel before

assembling according to manufacturer’s instructions. Apply

sanding sealer.
IMPORTANT: If you are painting an unfinished mantel (C36TU

only), assemble mantel before painting. Follow directions

listed on paint for wood products. Apply base coat and top

coat following directions listed on product.
Note: Gather all mantel pieces together before assembling

mantel.

WARNING: Only use 1

1

/

4

" screws to assemble

mantel. Damage to mantel will result if other screws

are used for this purpose.

C36TU and C36TO

Corner Mantel and Base

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Important: Read entire instruction sheet before
assembling or installing mantel kit.
These mantels are only approved for use with any
DESA Heating, LLC 36" electric and gas fireplace sys-
tems. Do not use mantel with any other product.

This mantel kit contains the following:
• Mantel pieces - unassembled and numbered as follows:
#1 Base
#2 Right Side Assembly
#3 Left Side Assembly
#4 Header
#5 Top
#6 Top Triangle
#7 Top Left Support
#8 Top Right Support
#9 Top Center Support
#10 Base Support
#11 Vertical Support
Right Top Trim Strip
Left Top Trim Strip
• Hardware Package
36 - 1

1

/

4

" Wood Screws

114325-01

8 - 1" Finishing Nails

114295-04

4 - 2" Wood Screws

122447-01

* Extra hardware may be included

Tools required:
• Power Screwdriver with #2 Phillips Bit
• Hammer
• Nail Set

www.desatech.com

Advertising
This manual is related to the following products: